搜索

专业生产：35kV及以下电力电缆、屏蔽控制电缆和计算机电缆，矿物绝缘防火电缆等电缆

“珠湖牌”系列电缆

首页
>
产品展示
>
控制电缆
>
聚氯乙烯绝缘控制电缆

联系电话：
0514-84582149，84583649

企业邮箱：
jsrunhua@qq.com

公司地址：
江苏省高邮市高邮镇工业集中区

润华电缆 走向世界     

公司始建于1989年10月，系原机械工业部电线电缆定点生产企业、全国重合同守信用企业、国家级星火计划项目企业、江苏省高新技术企业、资信等级AAA企业。是中国华电集团公司、中国国电集团公司、中国大唐集团公司的供应商，是中国石化总公司石化资源市场成员厂、中国石油天然气集团公司一级供应网络成员单位，其生产的消防电缆在公安部消防产品信息网上被定为首选产品，并取得了中国铁路工程交易中心的工程交易证书。

版权所有：江苏润华电缆股份有限公司   苏ICP备11011011号 

浏览量:
产品名称

聚氯乙烯绝缘控制电缆

所属分类
控制电缆
没有此类产品
描述

 

一、聚氯乙烯绝缘控制电缆

PVC insulated control cables
 
产品标准GB/T9330-2008 IEC227Standard implemented: GB/T9330-2008 IEC227
 
用途
Scope of aplication
 
本产品用于交流额定电压450/750V及以下配电装置中电器仪表的接线。
This product is used in connecting the electic apparatus and meters for power distributing devices with the AC rated voltage up to 450/750Vor below,
 
使用特性
Service characteristics
 
电缆导体的长期允许工作温度为70C,电缆的敷设温度应不低于0C。
The long-tem working temperature of the cable is 70C; and the temperature for laying the cable shall be not lower than0c.
 
允许弯曲半径:
The permitted bending radius:
 
对无铠装层的电缆，应不小于电缆外径的6倍。
For non-armored cables, it shall be not smaler than 6 times of the outer diameter of the cable.
 
对有铠装或铜带屏蔽结构的电缆，应不小于电缆外径的12倍。
 For armored or copper fape shielded cables, it shall be not smaller than 12 times of the outer diameter of the cable.
 
对有屏蔽层结构的软电缆，应不小于电缆外径的6倍。
For shielded soft cables, i计t shall be not smaller than 6 times of the outer diameter of the cable.
 
电线、电缆型号名称及规格
Types,names and specificotions of the electric wires and cabies
 
型号
Model No
产品名称
Noes of producis
 使用范围
Scope of applicalion
KVV 铜芯聚氯乙烯绝缘聚氯乙烯护套控制电缆
Copper core PVC insulated PVC sheathed control cabie		 敷设在室内、电缆沟、管道固定场合
Laid indoor or cable grooves or pipes
KVVP 铜芯聚氯乙烯绝缘聚氯乙烯护套编织屏蔽控制电缆
Copper core PVC insulated PVC sheathed control wire braud shielded contril cabie		 敷设在室内、电缆沟、管道等要求屏蔽的固定场合
Laid in fixed piaces like room cable grooves or pipes, where shied is required.
KVVP2 铜芯聚氯乙烯绝缘聚氯乙烯护套铜带编织控制电缆
Copper core PVC insulated PVC sheathed copper tape shlelded armored  control cabie		 敷设在室内、电缆沟、管道等要求屏蔽的固定场合
Laid in fixed piaces like room cable grooves or pipes, where shied is required.
KVV32 铜芯聚氯乙烯绝缘聚氯乙烯护套钢带铠装控制电缆
Copper core PVC insulated PVC sheathed steel tape armbred control cabie		 敷设在室内、电缆沟、管道、直埋等能承受较大机械外力固定场合
Laid in fixed piaces like room cable grooves or pipes, where great mechanicatl forces exerted 
KVVR 铜芯聚氯乙烯绝缘聚氯乙烯护套细钢丝铠装控制电缆
Copper PVC insulated PVC sheathed steeltape aemored control cabie		 敷设在室内、电缆沟、管道、直埋等能承受较大机械外力固定场合
Laid in fixed piaces like room cable grooves or pipes, where great mechanicatl forces exerted
KVVRP 铜芯聚氯乙烯绝缘聚氯乙烯护套控制软电缆
Copper core PVC insulated PVC sheathed control cabie		 敷设在室内要求移动、柔软等场合
Laid in environment and places indoors where flexubility is required.
KVVP3 铜芯聚氯乙烯绝缘聚氯乙烯护套编织屏蔽控制软电缆
Copper core PVC insulated PVC sheathed brayd shielded control cabie		 敷设在室内要求移动、柔软、屏蔽等场合
Laid in mobile environment and places indoors where flexubility and shield is required.
KVVP3 铜芯聚氯乙烯绝缘聚氯乙烯护套铝塑/复合带屏蔽控制软电缆
Copper core PVC insulated PVC sheathed aluminium-plastics tore armored control cabie		 敷设在室内、电缆沟、管道等要求屏蔽的固定场合
Laid in fixed places fike room,cable grooves of pipes where shield is required.
KVVP2-22 铜芯聚氯乙烯绝缘聚氯乙烯护套铜带屏蔽钢带铠装控制软电缆
Copper core PVC insulated PVC sheathed coppertape shielded steel tapearmored control cabie		 敷设在室内、电缆沟、管道、直埋等屏蔽且能承受交到机械外力等固定场合
Laid in fixed places fike room,cable grooves of pipes where gteat mechanical forces are exerted.
 
规格 Specifications
 
型号
Model No
导体标称截面（mm2）
Nominal sectional area of conductors
0.5 0.75 1.0 1.5 2.5 4 6 10
芯数 Nomber of cares
KVV、KVVP - 2-61 2-14 2-10
KVVP2、KVVP3 - 4-61 4-14 4-10
KVV22 - 7-61 4-61 4-14 4-10
KVV2-22 - 7-61 4-61 4-14 4-10
KVV32 - 19-61 4-61 4-14 4-10
KVVR 2-61 - -
KVVRP 2-61 2-48 - -
注：推荐的芯数系列为：2、3、4、5、7、10、12、14、16、19、24、27、30、37、44、48、52和61芯
Note:The recommended No.of cires are 2、3、4、5、7、10、12、14、16、19、24、27、30、37、44、48、52 and 61 cores 

 

技术要求   Technicat requirements

①导电线芯分为三种:第一种、第二种适用于固定敷设(第一种是实心导体,第二种是绞合导体)。第五种也是绞合导体，适用于移动要求的软电缆。
There are three types of cores for conducting Type I and 2 are fit for being laid in fixed places type has solid core conductor and type 2twisted Type 5 aiso has twisted conductor, fit for the soft cables meeting the requirements of fiexibility

②导体结构及直流电阻
Structures and DC resistances of the conductors shall comply with tobe

标称截面（mm2）
Nominal sectional area
 导体结构 Structures      200C时导体直流电阻（Ω/KM）不大于
种类
Type
根数/单线标称直径（mm）
No.of thresds/single thread nominal diameter 

不镀锡
Non-finplateb

 镀锡
Tinpiated
0.5 5 16/0.20 39.0 41.0
0.75 1 1/0.97 24.5 24.8
0.75 2 7/0.37 24.5 24.8
0.75 5 24/0.20 26.0 26.7
1.0 1 1/1.13 18.1 18.2
1.0 2 7/0.43 18.1 18.2
1.0 5 32/0.20 19.5 20.0
1.5 1 1/1.38 12.1 12.2
1.5 2 7/0.52 12.1 12.2
1.5 2 30/0.25 13.3 13.7
2.5 1 1/1.78 7.41 7.56
2.5 2 7/0.68 7.41 7.56
2.5 5 50/0.25 7.98 8.21
4 1 1/2.25 4.61 4.70
4 2 7/0.85 4.61 4.70
6 1 1/2.76 3.08 3.11
6 2 7/1.04 3.08 3.11
10 2 7/1.35 1.83 1.84

绝缘线芯识别可采用颜色标志或数字标志。
The insuation can idenfifld with colors or numbers

※成品电缆应定期进行物理性能试验
Finished cables shall have fest of mechanical properlies regularly and thermal degradtion test The test reall comply wuth details in the following table

类别
Type		 项目
Items		 抗拉强度
Tension strength ≮ (N/m2)		 断裂伸长率
Exlension af break ≮ (%)		 老化后  After degrqadation
老化条件
Conditions of degrdation		 抗拉强度变化率
Tensitle strength change ≯ （%）		 断裂伸长率变化
Change of exension at dreak
   

绝缘
Insulation

 PVC-l1 12.5 150 100±2 168 ±25 ±25
PVC-l2 10.0 150 80±2 168 ±20 ±20
护套
Sheath		 PVC-s2 12.5 150 100±2 168 ±25 25±
PVC-s2 10.0 150 80±2 168 ±20 ±20

绝缘线芯应经受工频火花试验,试验电压有效值为6KV
Insulation core shall undergo line frequency spark test. The virtual value of the test voltage is 6KV

成品电能经受交流50H7:3000V:5mn的耐压试验
Finished cable sha be able to withstand the voitage test of AC 50HZ 3000V 5min

屏蔽电的屏层采用铜线编织或带绕包
Shielding layer of the shielded cable is braided round copper wire or wind with copper tape

外护套的标称厚度
The nominal thickness of the outer sheath shall comply with table .

护套前外径(MM)
The front outer diameler of sheath		 标称厚度（mm）
Nominal thickness
10及以下   10 and below 1.2
10.1-15 1.5
15.1-25 1.7
25.1-30 2.0
30.1及以下  30.1 and above 2.2

※KVV型450/750V铜芯聚氯乙烯绝缘聚氯乙烯护套控制电缆
KVV 450/750V copper core insulated PVC sheathed control cables

芯数×标称截面（mm2）
Number al cores×seclional area 
 导体种类
Type of conductor		 绝缘标称厚度（mm）
Nominal thickness of insulalion		 平均外径（mm）
Average outer diameler		 70℃时绝缘电阻最小值
Minimum insutating resistance of 70℃
下限
Lower limit		 上限
Upper limit
2×0.75 1 0.6 6.7 8.1 0.012
2×0.75 2 0.6 6.9 8.4 0.014
2×1.0 1 0.6 7.0 8.5 0.011
2×1.0 2 0.6 7.2 8.7 0.013
2×1.5 1 0.7 7.9 9.5 0.011
2×1.5 2 0.7 8.1 9.7 0.010
2×2.5 1 0.8 9.0 10.9 0.010
2×2.5 2 0.8 9.2 11.1 0.009
2×4 1 0.8 9.9 11.9 0.0085
2×4 2 0.8 10.2 12.3 0.0077
2×6 1 0.8 10.8 13.1 0.0070
2×6 2 0.8 11.2 13.6 0.0065
2×10 2 1.0 14.3 17.3 0.0065
3×0.75 1 0.6 7.1

8.5

 0.012
3×0.75 2 0.6 7.3 8.8 0.014
3×1.0 1 0.6 7.4 8.9 0.011
3×1.0 2 0.6 7.6 9.1 0.013
3×1.5 1 0.7 8.3 10 0.011
3×1.5 2 0.7 8.5 10.3 0.011
3×2.5 1 0.8 9.5 11.5 0.010
3×2.5 2 0.8 9.7 11.8 0.009
3×4 1 0.8 10.5 12.7 0.0085
3×4 2 0.8 10.8 13.0 0.0077
3×6 1 0.8 11.5 13.9 0.0070
3×6 2 0.8 11.9 14.4 0.0065
3×10 2 1.0 15.2 18.4 0.0065
4×0.75 1 0.6 7.6 9.2 0.012
4×0.75 2 0.6 7.8 9.4 0.014
4×1.0 1 0.6 7.9 9.6 0.011
4×1.0 2 0.6 8.2 9.9 0.013
4×1.5 1 0.7 9.0 10.9 0.011
4×1.5 2 0.7 9.2 11.1 0.010
4×2.5 1 0.8 10.4 12.5 0.010
4×2.5 2 0.8 10.6 12.8 0.009
4×4 1 0.8 11.4 13.8 0.0085
4×4 2 0.8 11.8 14.2 0.0077
4×6 1 0.8 13.2 15.9 0.0070
4×6 2 0.8 13.6 16.5 0.0065
4×10 2 1.0 16.6 20.1 0.0065
5×0.75 1 0.6 8.2 9.9 0.012
5×0.75 2 0.6 8.4 10.2 0.014
5×1.0 1 0.6 8.6 10.3 0.011
5×1.0 2 0.6 8.8 10.6 0.013
5×1.5 1 0.7 9.7 11.7 0.011
5×1.5 2 0.7 10.0 12.1 0.010
5×2.5 1 0.8 11.3 13.6 0.010
5×2.5 2 0.8 11.5 13.9 0.009
5×4 1 0.8 13.0 15.7 0.0085

 

芯数×标称截面（mm2）
Number al cores×seclional area
 导体种类
Type of conductor		 绝缘标称厚度（mm）
Nominal thickness of insulalion		 平均外径（mm）
Average outer diameler		 70℃时绝缘电阻最小值
Minimum insutating resistance of 70℃
下限
Lower limit		 上限
Upper limit
5×4 2 0.8 13.4 16.2 0.0077
5×6 1 0.8 14.3 17.3 0.0070
5×6 2 0.8 14.8 17.9 0.0065
5×10 2 1.0 18.2 22.0 0.0065
7×0.75 1 0.6

8.8

 10.6 0.012
7×0.75 2 0.6 9.1 11.0 0.014
7×1.0 1 0.6 9.2 11.1 0.011
7×1.0 2 0.6 9.5 11.5 0.013
7×1.5 1 0.7 10.5 12.7 0.011
7×1.5 2 0.7 10.8 13.1 0.010
7×2.5 1 0.8 12.8 15.5 0.010
7×2.5 2 0.8 13.1 15.8 0.009
7×4 1 0.8 14.1 17.1 0.0085
7×4 2 0.8 14.5 17.6 0.0077
7×6 1 0.8 15.6 18.8 0.0070
7×6 2 0.8 16.1 19.5 0.0065
7×10 2 1.0 20.3 24.5 0.0065
8×0.75 1 0.6 9.7 11.7 0.012
8×0.75 2 0.6 10.0 12.1 0.014
8×1.0 1 0.6 10.2 12.3 0.011
8×1.0 2 0.6 10.5 12.7 0.013
8×1.5 1 0.7 11.7 14.1 0.011
8×1.5 2 0.7 12.6 15.2 0.010
8×2.5 1 0.8 14.3 12.7

0.010
8×2.5 2 0.8 14.6 17.6 0.009
8×4 1 0.8 15.8 19.0 0.085
8×4 2 0.8 16.3 19.6 0.0077
8×6 1 0.8 17.4 21.0 0.0070
8×6 2 0.8 18.1 21.8 0.0065
8×10 2 1.0 22.8 27.5 0.0065
10×0.75 1 0.6 10.8 13.1 0.012
10×0.75 2 0.6 11.2 13.6 0.014
10×1.0 1 0.6 11.4 13.8 0.011
10×1.0 2 0.6 11.8 14.3 0.013
10×1.5 1 0.7 13.7 16.6 0.010
10×1.5 2 0.7 14.1 17.1 0.010
10×2.5 1 0.8 16.0 19.4 0.010
10×2.5 2 0.8 16.4 19.8 0.009
10×4 1 0.8 17.8 21.5 0.0085
10×4 2 0.8 18.7 22.6 0.0077
10×6 1 0.8 20.1 24.2 0.0070
10×6 2 0.8 20.8 25.2 0.0065
10×10 2 1.0 25.8 31.2 0.0065
12×0.75 1 0.6 11.2 13.5 0.012
12×0.75 2 0.6 11.6 14.2 0.014
12×1.0 1 0.6 11.8 14.2 0.011
12×1.0 2 0.6 12.8 15.4 0.013
12×1.5 1 0.7 14.2

17.1

 0.011
12×1.5 2 0.7 14.5 17.6 0.010
12×2.5 1 0.8 16.5 20.0 0.010

 

芯数×标称截面（mm2）
Number al cores×seclional area
 导体种类
Type of conductor		 绝缘标称厚度（mm）
Nominal thickness of insulalion		 平均外径（mm）
Average outer diameler		 70℃时绝缘电阻最小值
Minimum insutating resistance of 70℃
下限
Lower limit		 上限
Upper limit
12×2.5 2 0.8 16.9 20.5 0.009
12×4 1 0.8 18.7 22.6 0.0085
12×4 2 0.8 19.3 23.4 0.0077
12×6 1 0.8 20.7 25.0 0.0070
12×6 2 0.8 21.5 26.0 0.0065
14×0.75 1 0.6 11.7 14.1 0.012
14×0.75 2 0.6 12.7 15.3 0.014
14×1.0 1 0.6 12.9 15.6 0.011
14×1.0 2 0.6 13.3 16.1 0.013
14×1.5 1 0.7 14.8 17.9 0.011
14×1.5 2 0.7 15.2 18.4 0.010
14×2.5 1 0.8 17.4 21.0 0.010
14×2.5 2 0.8 17.8 21.5 0.009
14×4 1 0.8 19.6 23.7 0.0085
14×4 2 0.8 20.3 24.5 0.0077
14×6 1 0.8 21.8 26.3 0.0070
14×6 2 0.8 22.6 27.3 0.0065
16×0.75 1 0.6 12.9 15.5 0.012
16×0.75 2 0.6 13.3 16.1 0.014
16×1.0 1 0.6 13.5 16.4 0.011
16×1.0 2 0.6 14.0 16.9 0.013
16×1.5 1 0.7 15.6 18.8 0.011
16×1.5 2 0.7 16.0 19.4 0.010
16×2.5 1 0.8 18.3 22.1 0.010
16×2.5 2 0.8 19.1 23.1 0.009
19.×0.75 1 0.6 13.5 16.3 0.012
19.×0.75 2 0.6 14.0 16.9 0.014
19×1.0 1 0.6 14.2 17.2 0.011
19×1.0 2 0.6 14.7 17.7 0.013
19×1.5 1 0.7 16.4 19.8 0.011
19×1.5 2 0.7 16.8 20.4 0.010
19×2.5 1 0.8 19.6 23.4 0.010
19×2.5 2 0.8 20.1 24.3 0.009
24×0.75 1 0.6 15.6 18.8 0.012
24×0.75 2 0.6 16.1 19.5 0.014
24×1.0 1 0.6 16.4 19.8 0.011
24×1.0 2 0.7 17.0 20.5 0.013
24×1.5 1 0.7 19.4 23.4 0.011
24×1.5 2 0.7 20.0 24.1 0.010
24×2.5 1 0.8 22.8 27.6 0.010
24×2.5 2 0.8 23.4 28.3 0.009
27×0.75 1 0.6 15.9 19.2 0.012
27×1.75 2 0.6 16.5 19.9 0.014
27×1.0 1 0.6 16.7 20.2 0.011
27×1.0 2 0.6 17.3 20.9 0.013
27×1.5 1 0.7 19.8 23.9 0.011
27×1.5 2 0.7 20.4 24.6 0.010
27×2.5 1 0.8 23.3 28.2 0.010
27×2.5 2 0.8 23.9 28.9 0.009
30×0.75 1 0.8 16.4 19.8 0.012

 

芯数×标称截面（mm2）
Number al cores×seclional area
 导体种类
Type of conductor		 绝缘标称厚度（mm）
Nominal thickness of insulalion		 平均外径（mm）
Average outer diameler		 70℃时绝缘电阻最小值
Minimum insutating resistance of 70℃
下限
Lower limit		 上限
Upper limit
30.×0.75 2 0.6 17.0 20.6 0.014
30×1.0 1 0.6 17.5 20.5 0.011
30×1.0 2 0.6 18.0 22.0 0.013
30×1.5 1 0.7 20.0 23.0 0.011
30×1.5 2 0.7 21.0 25.0 0.010
30×2.5 1 0.8 24.0 27.0 0.010
30×2.5 2 0.8 24.5 29.5 0.009
37×0.75 1 0.6 17.5 20.5 0.012
37×0.75 2 0.6 18.0 22.0 0.014
37×1.0 1 0.6 19.0 23.0 0.011
37×1.0 2 0.6 19.7 23.8 0.013
37×1.5 1 0.7 22.0 26.6 0.011
37×1.5 2 0.7 22.7 27.4 0.010
37×2.5 1 0.8 26.1 31.5 0.010
37×2.5 2 0.8 26.7 32.3 0.009
44×0.75 1 0.6 20.1 24.2 0.012
44×0.75 2 0.6 20.8 25.2 0.014
44×1.0 1 0.6 21.2 25.6 0.011
44×1.0 2 0.6 22.0 26.6 0.013
44×1.5 1 0.7 24.7 29.8 0.011
44×1.5 2 0.7 25.4 30.7 0.010
44×2.5 1 0.8 29.9 26.1 0.010
44×2.5 2 0.8 30.6 37.0 0.009
48×0.75 1 0.6 20.4 24.6 0.012
48×0.75 2 0.6 21.2 25.6 0.014
48×1.0 1 0.6 21.5 26.0 0.011
48×1.0 2 0.6 22.3 27.0 0.013
48×1.5 1 0.7 25.1 30.3 0.011
48×1.5 2 0.7 25.9 31.2 0.010
48×2.5 1 0.8 30.3 26.7 0.010
48×2.5 2 0.8 31.1 37.6 0.009
52×0.75 1 0.6 20.9 25.3 0.012
52×0.75 2 0.6 21.7 26.2 0.014
52×1.0 1 0.6 22.1 26.7 0.011
52×1.0 2 0.6 22.9 27.7 0.013
52×1.5 1 0.7 25.8 31.1 0.011
52×1.5 2 0.7 26.6 32.1 0.010
52×2.5 1 0.8 31.2 37.7 0.010
52×2.5 2 0.8 32.0 38.6 0.009
61×0.75 1 0.6 21.9 26.5 0.012
61×0.75 2 0.6 22.8 27.5 0.014
61×1.0 1 0.6 23.2 28.0 0.011
61×1.0 2 0.6 24.1 29.1 0.013
61×1.5 1 0.7 27.0 32.7 0.011
61×1.5 2 0.7 28.5 34.4 0.010
61×2.5 1 0.8 33.1 40.0 0.010
61×2.5 2 0.8 34.0 41.0 0.009

 

KVVP型450/750V铜芯聚氯乙烯绝缘聚氯乙烯护套编织屏蔽控制电缆
KVVP 450/750V copper core PVC insulated PVC sheated braid shielded control cables

芯数×标称截面（mm2）
Number al cores×seclional area
 导体种类
Type of conductor		 绝缘标称厚度（mm）
Nominal thickness of insulalion		 屏蔽单丝直径（mm）
Dameter of single shelding wire		 平均外径（mm）
Average outer diameler		 70℃时绝缘电阻最小值
Minimum insutating resistance of 70℃
下限
Lower limit		 上限
Upper limit
2×0.75 1 0.6 0.15 7.7 9.3 0.12
2×0.75 2 0.6 0.15 7.9 9.6 0.014
2×1.0 1 0.6 0.15 8.0 9.7 0.011
2×1.0 2 0.6 0.15 8.2 9.9 0.013
2×1.5 1 0.7 0.15 8.9 10.7 0.011
2×1.5 2 0.7 0.15 9.1 11.0 0.010
2×2.5 1 0.8 0.15 10.0 12.1 0.010
2×2.5 2 0.8 0.15 10.2 12.4 0.009
2×4 1 0.8 0.2 10.9 13.2 0.0085
2×4 2 0.8 0.2 11.2 13.5 0.0077
2×6 1 0.8 0.2 11.9 14.3 0.0070
2×615.8 2 0.8 0.2 12.8 15.5 0.0065
2×10 2 1.0 0.2 15.6 18.8 0.0065
3×0.75 1 0.6 0.15 8.1 9.7 0.012
3×0.75 2 0.6 0.15 8.3 10.0 0.014
3×1.0 1 0.6 0.15 8.4 10.1 0.011
3×1.0 2 0.6 0.15 8.6 10.4 0.013
3×1.5 1 0.7 0.15 9.3 11.2 0.011
3×1.5 2 0.7 0.15 9.5 11.5 0.010
3×2.5 1 0.8 0.15 10.5 12.7 0.010
3×2.5 2 0.8 0.15 10.8 13.0 0.009
3×4 1 0.8 0.2 11.5 13.9 0.0085
3×4 2 0.8 0.2 11.8 14.2 0.0077
3×6 1 0.8 0.2 13.1 15.8 0.0070
3×6 2 0.8 0.2 13.7 16.6 0.0065
3×10 2 1.0 0.2 16.4 19.9 0.0065
4×0.75 1 0.6 0.15 8.6 10.4 0.012
4×0.75 2 0.6 0.15 8.8 10.7 0.014
4×10.0 1 0.6 0.15 8.9 10.8 0.011
4×1.0 2 0.6 0.15 9.2 11.1 0.013
4×1.5 1 0.7 0.15 10.0 12.1 0.011
4×1.5 2 0.7 0.15 10.2 12.4 0.010
4×2.5 1 0.8 0.15 11.4 13.8 0.010
4×2.5 2 0.8 0.15 11.6 14.0 0.009
4×4 1 0.8 0.2 13.0 15.7 0.0085
4×4 2 0.8 0.2 13.6 16.4 0.0077
4×6 1 0.8 0.2 14.4 17.4 0.0070
4×6 2 0.8 0.2 14.9 18.0 0.0065
4×10 2 1.0 0.2 17.9 21.6 0.0065
5×0.75 1 0.6 0.15 9.2 11.1 0.012
5×0.75 2 0.6 0.15 9.4 11.4 0.014
5×1.0 1 0.6 0.15 9.6 11.6 0.011
5×1.0 2 0.6 0.15 9.8 11.9 0.013
5×1.5 1 0.7 0.15 10.7 13.0 0.011
5×1.5 2 0.7 0.15 11.1 13.3 0.010
5×2.5 1 0.8 0.2 12.9 15.5 0.010
5×2.5 2 0.8 0.2 13.1 15.9 0.009
5×4 1 0.8 0.2 14.3 17.2 0.0085
5×4 2 0.8 0.2

14.7

 17.7 0.0077
5×6 1 0.8 0.2 15.6 18.8 0.0070
5×6 2 0.8 0.2 16.1 19.4 0.0065

 

芯数×标称截面（mm2）
Number al cores×seclional area
 导体种类
Type of conductor		 绝缘标称厚度（mm）
Nominal thickness of insulalion		 屏蔽单丝直径（mm）
Dameter of single shelding wire		 平均外径（mm）
Average outer diameler		 70℃时绝缘电阻最小值
Minimum insutating resistance of 70℃
下限
Lower limit		 上限
Upper limit
5×10 2 1.0 0.2 19.8 24.0 0.0065
7×0.75 1 0.6 0.15 9.8 11.8

0.012
7×0.75 2 0.6 0.15 10.1 12.2 0.014
7×1.0 1 0.6 0.15 10.2 12.4 0.011
7×1.0 2 0.6 0.15 10.5 12.7 0.013
7×1.5 1 0.7 0.15 11.5 13.9 0.011
7×1.5 2 0.7 0.15 11.8 14.3 0.010
7×2.5 1 0.8 0.2 14.1 17.0 0.010
7×2.5 2 0.8 0.2 14.4 17.3 0.009
7×4 1 0.8 0.2 15.4 18.6 0.0085
7×4 2 0.8 0.2 15.8 19.1 0.0077
7×6 1 0.8 0.2 16.8 20.3 0.0070
7×6 2 0.8 0.2 17.4 21.0 0.0065
7×10 2 1.0 0.2 21.5 26.0 0.0065
8×0.75 1 0.6 0.15 10.7 13.0 0.012
8×0.75 2 0.6 0.15 11.7 13.4 0.014
8×1.0 1 0.6 0.15 11.1 13.6 0.011
8×1.0 2 0.6 0.15 11.2 14.0 0.013
8×1.5 1 0.7 0.2 11.5 16.3 0.011
8×1.5 2 0.7 0.2 13.5 16.7 0.010
8×2.5 1 0.8 0.2 13.9 18.7 0.010
8×2.5 2 0.8 0.2 15.5 19.1 0.009
8×4 1 0.8 0.2 15.8 20.5 0.0085
8×4 2 0.8 0.2 17.7 21.1 0.0077
8×6 1 0.8 0.2 17.5 23.0 0.0070
8×6 2 0.8 0.2 19.0 23.8 0.0065
8×10 2 1.0 0.25 24.2 29.3 0.0065
10×0.75 1 0.6 0.2 11.9 14.3 0.012

10×0.75

 2 0.6 0.2 12.8 15.5 0.014
10×1.0 1 0.6 0.2 13.0 15.7 0.011
10×1.0 2 0.6 0.2 13.6 16.5 0.013
10×1.5 1 0.7 0.2 15.0 18.1 0.011
10×1.5 2 0.7 0.2 15.4 18.6 0.010
10×2.5 1 0.8 0.2 17.3 20.9 0.010
10×2.5 2 0.8 0.2 17.7 21.3 0.009
10×4 1 0.8 0.2 19.4 23.4 0.0085
10×4 2 0.8 0.2 20.0 24.1 0.0077
10×6 1 0.8 0.25 21.3 25.8 0.0070
10×6 2 0.8 0.25 22.1 26.7 0.0065
10×10 2 1.0 0.25 27.9 33.7 0.0065
12×0.75 1 0.6 0.2 12.8 15.4 0.012
12×0.75 2 0.6 0.2 13.2 15.9 0.014
12×1.0 1 0.6 0.2 13.6 16.4

0.011
12×1.0 2 0.6 0.2 14.0 16.9 0.013
12×1.5 1 0.7 0.2 15.4 18.6 0.011
12×1.5 2 0.7 0.2 15.8 19.1 0.010
12×2.5 1 0.8 0.2 17.8 21.5

0.010

 

芯数×标称截面（mm2）
Number al cores×seclional area
 导体种类
Type of conductor		 绝缘标称厚度（mm）
Nominal thickness of insulalion		 屏蔽单丝直径（mm）
Dameter of single shelding wire		 平均外径（mm）
Average outer diameler		 70℃时绝缘电阻最小值
Minimum insutating resistance of 70℃
下限
Lower limit		 上限
Upper limit
12×2.5 2 0.8 0.2 18.2 22.0 0.0029
12×4 1 0.8 0.2 20.0 24.1 0.0085
12×4 2 0.8 0.2 20.6 24.9 0.0077
12×6 1 0.8 0.25 22.0 26.6 0.0070
12×6 2 0.8 0.25 22.8 27.5 0.0065
14×0.75 1 0.6 0.2 13.5 16.3 0.012
14×0.75 2 0.6 0.2 13.9 16.8 0.014
14×1.0 1 0.6 0.2 14.2 17.1 0.011
14×1.0 2 0.6 0.2 14.6 17.6 0.013
14×1.5 1 0.7 0.2 16.1 19.4 0.011
14×1.5 2 0.7 0.2 16.5 19.9 0.010
14×2.5 1 0.8 0.2 19.0 22.9 0.010
14×2.5 2 0.8 0.2 19.4 23.4 0.009
14×4 1 0.8 0.2 20.9 25.2 0.0085
14×4 2 0.8 0.2 21.5 26.0 0.0077
14×6 1 0.8 0.25 23.0 27.8 0.0070
14×6 2 0.8 0.25 24.1 29.1 0.0065
16×0.75 1 0.6 0.2 14.1 17.1 0.012
16×0.75 2 0.6 0.2 14.6 17.6 0.014
16×1.0 1 0.6 0.2 14.8 17.9 0.011
16×1.0 2 0.6 0.2 15.2 18.4 0.013
16×1.5 1 0.7 0.2 16.8 20.3 0.011
16×1.5 2 0.7 0.2 17.3 20.9 0.010
16×2.5 1 0.8 0.2 19.9 24.1 0.010
16×2.5 2 0.8 0.2 20.4 24.6 0.009
19×0.75 1 0.6 0.2 14.7 17.8 0.012
19×0.75 2 0.6 0.2 15.2 18.4 0.014
19×1.0 1 0.6 0.25 15.5 18.7 0.011
19×1.0 2 0.6 0.25 15.9 19.3 0.013
19×1.5 1 0.7 0.2 17.6 21.3 0.011
19×1.5 2 0.7 0.2 18.1 21.9 0.010
19×2.5 1 0.8 0.2 20.9 25.2 0.010
19×2.5 2 0.8 0.2 21.4 25.8 0.009
24×0.75 1 0.6 0.2 16.8 20.3 0.012
24×0.75 2 0.6 0.2 17.4 21.0 0.014
24×1.0 1 0.6 0.2 17.7 21.3 0.011
24×1.0 2 0.6 0.2 18.2 22.0 0.013
24×1.5 1 0.7 0.2 20.6 24.9 0.011
24×1.5 2 0.7 0.2 21.2 25.6 0.010
24×2.5 1 0.8 0.25 24.3 29.4 0.010
24×2.4 2 0.8 0.25 24.9 30.1 0.009
27×0.75 1 0.6 0.2 17.1 20.7 0.012
27×0.75 2 0.6 0.2 17.7 21.4 0.014
27×1.0 1 0.6 0.2 18.0 21.7 0.011
27×1.0 2 0.6 0.2 19.0 22.9 0.013
27×1.5 1 0.7 0.2 21.0 25.4 0.011
27×1.5 2 0.7 0.2 21.6 26.1 0.010

 

 

 

芯数×标称截面（mm2）
Number al cores×seclional area
 导体种类
Type of conductor		 绝缘标称厚度（mm）
Nominal thickness of insulalion		 屏蔽单丝直径（mm）
Dameter of single shelding wire		 平均外径（mm）
Average outer diameler		 70℃时绝缘电阻最小值
Minimum insutating resistance of 70℃
下限
Lower limit		 上限
Upper limit
27×2.5 1 0.8 0.25 24.8 30.0 0.010
27×2.5 2 0.8 0.25 25.4 30.7 0.009
30×0.75 1 0.6 0.2 17.6 21.3 0.012
30×0.75 2 0.6 0.2 18.3 22.1 0.014
30×1.0 1 0.6 0.2 19.0 22.9 0.011
30×1.0 2 0.6 0.2 19.6 23.6 0.013
30×1.5 1 0.7 0.25 21.7 26.2 0.011
30×1.5 2 0.7 0.25 22.3 27.0 0.010
30×2.5 1 0.8 0.25 25.7 31.0 0.010
30×2.5 2 0.8 0.25 26.3 31.7 0.009
37×0.75 1 0.6 0.2 19.2 19.9 0.012
37×0.75 2 0.6 0.2 23.3 24.1 0.014
37×1.0 1 0.6 0.2 20.3 20.9 0.011
37×1.0 2 0.6 0.2 24.5 25.3 0.013
37×1.5 1 0.7 0.25 23.3 24.2 0.011
37×1.5 2 0.7 0.25 28.1 29.2 0.010
37×2.5 1 0.8 0.25 28.1 28.8 0.010
37×2.5 2 0.8 0.25 34.0 34.8 0.009
44×0.75 1 0.6 0.25     0.012
44×0.75 2 0.6 0.25     0.014
44×1.0 1 0.6 0.25     0.011
44×1.0 2 0.6 0.25     0.013
44×1.5 1 0.7 0.25     0.011
44×1.5 2 0.7 0.25     0.010
44×2.5 1 0.8 0.3     0.010
44×2.5 2 0.8 0.3     0.009
48×0.75 1 0.6 0.25     0.012
48×0.75 2 0.6 0.25     0.014
48×1.0 1 0.6 0.25     0.011
48×1.0 2 0.6 0.25     0.013
48×1.5 1 0.7 0.25     0.011
48×1.5 2 0.7 0.25     0.010
48×2.5 1 0.8 0.3     0.010
48×2.5 2 0.8 0.3     0.009
52×0.75 1 0.6 0.25     0.012
52×0.75 2 0.6 0.25     0.014
52×1.0 1 0.6 0.25     0.011
52×1.0 2 0.6 0.25     0.013
52×1.5 1 0.7 0.25     0.011
52×1.5 2 0.7 0.25     0.010
52×2.5 1 0.8 0.3     0.010
52×2.5 2 0.8 0.3     0.009
61×0.75 1 0.6 0.25     0.012
61×0.75 2 0.6 0.25     0.014
61×1.0 1 0.6 0.25     0.011
61×1.0 2 0.6 0.25     0.013
61×1.5 1 0.7 0.25     0.011
61×1.5 2 0.7 0.25     0.010
61×2.5 1 0.8 0.3     0.010
61×2.5 2 0.8 0.3     0.009

 

未找到相应参数组，请于后台属性模板中添加
暂未实现,敬请期待
暂未实现,敬请期待
上一篇
无
聚氯乙烯绝缘控制电缆
下一篇

产品展示